Maruti Enterprises

In order to keep pace with the never-ending demands of customers, we are involved in offering a wide range of Berger Wood Stainer.

Other details:
For a touch of elegance

Surface Preparation

Ensure that the surface is clean and free from dampness, dirt and other contamination.

Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

Thinning

 

• Stir well before thinning the Paint

• Mix 30 - 40% of potable water

Application Procedure

Ensure that fresh walls are coated with one or two coats of white cement

Apply 2 coats of ALTURA Wall Primer with an interval of 3 - 4 hrs between subsequent coats

Undulations in the wall can be levelled using any good quality acrylic putty or cement based putty

Putty should be used between the first and second coat of ALTURA Wall Primer and sanding of the putty shall be done as per recommendation

Apply 2 coats ALTURA Emulsion with an interval of 4 to 5 hours between subsequent coats, after subjecting the second coat of ALTURA Wall Primer to sanding using #320 Sandpaper

Sanding of the top coat can be done with #600 Sandpaper

The number of coats of top coat depends on the chosen color

Darker shades may require additional coats